This is a replacement part for a wood pedestal table. It joins the table top to the foot. It is designed for #8-5/8 wood screws and ¼-20 T nut.
The post-mount.stl file provides for 5/16 " protrusion into the wood of the table top.
The T-nut can be tapped into place like you would do for wood.
The pedestal-table-post-mount.scad file lets you adjust parameters for a different circular pattern of the screws, larger T-nuts or the overall size of the mount.
The part has a 15% gyroid infill everywhere but the center where the T-nut is installed. There it is filled to 40% - see the 3mf file.
The prototype is in pink PLA, while the final piece is printed in copper, which is closer to the wood finish.
The author marked this model as their own original creation.