Connect four

That version of connect four game was made with blind people on mind, but there's no obstacle for anyone to play. :)

Pieces are distinguished by a cut-off symbol: circle of square. We recommend to print them with different colours, too.

Print settings

No rafts, supports or brim needed, at least on MK3S+ and Mini+. As the bridges on the board roof are long, some printers may have difficulties printing them, also some materials can be particularly hard here.

Prusament PLA for board and pawns gives good results, but we switched to Fiberlogy HD PLA for the board as it is a bit more durable.

Lid should be printed using flex, we're using Fiberlogy MattFlex 40D.

Standard 0.4 mm nozzle can do, we're printing it even using 0.6 mm. :)