Spool Holder CR-10S Pro V2

A spool holder designed for the Creality CR-10S Pro V2.

Inspired mostly by https://www.thingiverse.com/thing:2440814 but designed from the ground up to be fitted on top of the CR-10S Pro V2.

Requires four 608 bearings that can be picked up cheap anywhere, I grabbed these from Amazon: https://www.amazon.co.uk/gp/product/B01N6BFM6Y

Printed as 2 separate parts that interlock to allow for any sized spool.

Designed to be attached with a pair of M3 screws + T-Nuts. https://www.thingiverse.com/thing:3050607

Print Settings

Printer Brand:

Creality

Printer:

CR10S PRO

Rafts:

Doesn't Matter

Supports:

Yes

Resolution:

0.2

Infill:

40%

Notes:

The two main parts require supports, try to avoid supports inside the bolt holes as it could cause trouble with fitting the bolts.

I used a 40% infill to provide extra structure and strength, but that is possibly overkill. Use your best judgement...