Voron V0 Duo

I've designed this actually to get better at CAD so I am aware that it is not the greatest design but it works! :)

My purpose was to be able to print with different materials especially water soluble support materials and so on. So if you are going to use it for multicolour kind of applications I do not recommend it but nothing stops you from liking it :heart:

It loses from print space by 10mm but the whole bed is usable. It's just not with both heads.

I've bought the water cooling setup for a while ago but I see on AliExpress they still sell the same set. I've designed a bit different printable system for it, you can find it in my profile.

It does not have part cooling as I did not need for my application but it has the heatset insert location at the sides and it can be added if it is a must for you. If you want part cooling I recommend connecting it with a brass or aluminium (lighter option) pipe from an outside pump.

Material:

• ABS
• ABS+
• ASA

Print Settings:
Same as Voron Guide

• No support
• 40% infill
• 4-5 perimeters