Spice rack

Simple spice rack to organize all your herbs on the inside of your closet door.
 

Extra to buy ( and easy to find in your local hardware store ) :

• round aluminum tube with a diameter of 6 mm ( length : measure the inside of your kitchen cabinet minus about 4 cm.
  
  https://www.gamma.be/nl/assortiment/buis-rond-aluminium-mat-6x1000x1mm/p/B175902
   
• flat aluminium profile of 25 x 2 mm (length: same as the tube)
  
  https://www.gamma.be/nl/assortiment/profiel-plat-aluminium-brut-25x2x1000mm/p/B175329
   
• 4 screws ( 3.5 x 13 mm, or just the one you have lying around, jus make sure they are not too long )
  
  https://www.gamma.be/nl/assortiment/gyproc-teksschroeven-13-mm-100-st/p/B258205
   

The “divider” serves to prevent the long length from sagging.
Just print 1 or 2 of them, depending on the length of your alu profile.
 

To print the right side of the rack, just use the left side and mirror it over the y-axis in your slicer. ( or use the print files that I added )