I work in a robotics startup and this definitely needed to be attached to the robot cells. Thank you! And thanks for the magnet cutouts as well!
Robot attack safety counter sign with tags
I work in a robotics lab, so I thought it would be fun to procrastinate by making a safety sign to proudly display how…
196
360
14
2708
updated August 10, 2019
Makes
Comments
Sweet, just what our Robotics Club needed. I made a bracket with a shelf for ours, to hold the extra numbers. (edited)
Love this sign. Everyone that sees it gets a good chuckle from it.
Attached to the fridge, a reminder of the need for constant vigilance! Printed in eSun PLA+ magenta, black, and white, with manual colour changes and a silver sharpie. A 0.6mm nozzle and 0.3mm layer height was maybe just a little wide for the small print.
0.2mm layer 0.35mm nozzle Oveture Matt black PLA and Overture white PLA.
Love the inclusion of 6mm holes for mounting magnets.
When I saw this I knew I had to print one. Not sure I should bother printing the other numbers...
I would add a "0" which attached to both pegs but I would only hang it from one, so when you hung 0 it would hang at a messy diagonal indicating the aftermath of the attack. Printed in ABS. (edited)
I printed the numbers twice to have sufficient numbers to fill both digits. It was an easy print, and ended up doing it on my Mini+ in Matterhackers Pro Terracotta red and Pro White PLA. I used prusaslicer 2.4's new auto sign detection to slice it (since the pre-slice is for a MK3). It's for my nephew who works at a robot company which seemed appropriate...
