October 20 2021
Added updated Bobbin wheels of varying sizes based off https://www.thingiverse.com/thing:2875543
Original
Remixed to reduce the printing time and plastic used by almost 50%.
Original would take approximately 16hrs and use 138g (0.3lb) of filament
New would take approximately 8 1/2hrs and use 76g (0.7lb) of filament
There are 2 version of the horizontal rod holder as I did not have enough 6mm rod. Large size takes 6mm rod, small size take 3/16” (roughly 4.8mm) rod
Also 2 version of the Bobbin Wheel, large diameter takes 6mm rod, the other takes 3/16” (roughly 4.8mm) rod
1 x Central rod 8mm x230mm (longest I had)
2 x horizontal rods 3/16 x 200mm
4 x vertical rods 6mm x 40mm
4 x Petal
2 x Horizontal Brace
Depending on your preference
4 x Cone Holder and 8 x Bobbin wheel
or
12 x Bobbin wheel
The Cone holders are designed to fit overlock thread 'cones' which are much cheaper than buying regular bobbins. These are a remix of https://www.thingiverse.com/thing:3600438
Printer Brand:
Monoprice
Printer:
Maker Select
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
20%
Category: Hobby
The author remixed this model. Imported from Thingiverse.