Reolink E1 Zoom Ceiling Mount for Prusa Enclosure

IMPORTANT: Please check your cameras hardware version!

For Hardware Version 1 → Select model: E1 Zoom Ceiling Mount - HV1

For Hardware Version 2 → Select model: E1 Zoom Ceiling Mount - HV2

Print Settings

Printed on MK4 with PETG, 0.20mm QUALITY. 

I added supports underneath the twist-lock fastening connector pin in Slicer.

Additional Parts

Additional parts needed (included as spare parts with the Prusa Enclosure):

• 2x M3nS nut
• 2x M3x8 screw

Installation

Insert two M3nS nuts into the mount. Use the 2.5 mm Allen key to completely push the nuts inside.

Put the part in the upper corner of your enclosure and fasten it with two M3x8 screws from the top.

DONE!