jewelry box

jewelry box for Rings, Earrings, necklaces and other stuff
In the contest Ring Holders
1,351
2341
24
16 k
updated January 25, 2024

Description

PDF

Hello,

I made this jewelry box for my girlfriend. So she can store rings, Earrings and other stuff like necklace.

 

I made inputs for little magnets that the Drawers shut in a straight line. You need 16 of these. 

I used this one, but you can use any other magnets that fit in the holes. Magnets
I made a version for 6x2mm Magnets. 
I made a version for 6x2.7mm Magnets too. 

If you need any other magnet size, pls comment it and i will make an update on the model if its possible. 

 

It Should be possible to print every thing without support. I had no problems printing it without support on my bambu lab. 

 

You need four drawers. Put them above each other and glue the axis and top in place. 

If you want the drawer for Rings and earrings you need:

  • 2x Every Earring holder
  • 1x TPU Ring holder left
  • 1x TPU Ring holder right
  • 1x The Drawer for rings and earrings 

I would print the Ringholders in TPU that the rings get no scratches and are easy to put in and remove. 

Tags



Model origin

The author marked this model as their own original creation.

License