Clothes-Pegs

Having a bunch of brocken pegs I spent a few hours to extend the life of their metal springs and to convince my wife of the advantages of a 3D printer...

There is 2 versions for 2 different size of springs:

• 50-18-55:
  5.0mm diameter of the spring, 18mm length of the wings, 5.5mm thickness of one half of a peg
• 66-17-70:
  6.6mm diameter of the spring, 17mm length of the wings, 7.0mm thickness of one half of a peg

The pegs are quite easy to print with no support. UV resistant filament (ASA) is recommended. But PETG and ABS should do as well.

Needed material:
Nothing except some springs from broken pegs

History

Version 0.1.0

First published version and currently in use.

Print instructions

Rafts: Doesn't Matter
Supports: No
Resolution: 0.4 mm
Filament: PETG or ASA