The idea is that by arranging a dipole into a horizontal āVā shape, the radiation pattern will be directed skywards in a figure 0 (zero) pattern. This will be optimal for satellites travelling in front, above and behind the antenna. Since polar orbiting satellites always travel North to South or vice versa, we can take advantage of this fact simply by orienting the antenna North/South.
Parameters: The diameter of the antenna wire is 4 mm, the mounting screws are 2.5 mm hexagon. And the screws for assembling all three parts together are 3mm, and SMA.
Print parameters
Nozzle: 0,4
Supports: NO
Material: PLA, PETG
>> If you want to buy me a coffee, you can for any amount, I will be very grateful. <<
Don't forget to follow my profile so you don't miss anything. It costs nothing and made me happy. Thanks in advance.
Don't forget to upload a photo of your print and share.
Thank you very much for your support.
The author marked this model as their own original creation.