Ender 3 S1 Pro Filament Runout PTFE attachment - Remix of a Remix
NEW - Added cmh's Guide Funnel to remixed Valeriy Proklov's model by adding clips so it stays on - no hardware needed.
16
75
1
638
updated December 10, 2023
Description
PDFNew Remix - Added cmh's Guide Funnel to the Remixed Ender 3 S1 Pro Filament Runout PTFE attachment - No PTFE tube needed.
I remixed Valeriy Proklov's model by adding clips so it stays on - no hardware needed. The top hole for the PTFE tubing has been replaced with a filament funnel.
Printed with Atomic PLA with supports. 0.4mm nozzle/0.4mm line width, 0.2mm layer height, 3 walls, 1.2mm top/bottom, 20% gyroid infill.
Tags
Model origin
The author remixed this model.
Differences of the remix compared to the original
Added cmh's Guide Funnel to the Remixed Ender 3 S1 Pro Filament Runout PTFE attachment
