Simple peice that you can glue or stick with double sided tape at the bottom of a valve index.
Unscrew the tracker form the VIVE Pro (Eye) mount, and screw it in place. You may want to fiddle with the angle to get best results.
You will need a bolt, I haven't measured the threads. If you don't care about preserving the VIVE Pro bracket that comes with it you can break off the part with the threaded insert.
Rafts:
Doesn't Matter
Supports:
No
Resolution:
300
Infill:
20
Filament:
PolyMaker PLA
Notes:
Re-orient the part so the flat base is on your bed. (Will update the file later so it's the right way up by default later)
Category: ComputerThe author marked this model as their own original creation. Imported from Thingiverse.