Back Blade - OpenRC Tractor MK3 TEA20

A little something to push dirt and/or snow around with.
23
166
0
823
updated May 25, 2023

Description

PDF

Simple little print. All the hardware is 3mm (if you've built the tractor no doubt you have enough hardware left over) 

The blade can be set to push or pull and also locked in at an angle left or right depending on the need.

While it's not accurate to any real world implement it is modeled on all of them, and I think the proportions are close enough for the OpenRC MK3.

When I designed it I had thought to put a 3mm rod through the bottom of the hitch part. That is why the hole goes all the way through. I found that just pushing a couple of cap screw from either side keeps it attached to the tractor just fine. 

It is quite fun to play with.

Tags



Model origin

The author marked this model as their own original creation.

License