Print in Place Hinge

A working version of this was printed with a 0.6mm nozzle at 0.2mm layer height in PLA. 0.2mm layer height is likely the minimum layer height, but I have included the Fusion360 model and STEP files so that you can tweak the clearences as needed for your own use.

Dimensions are currently 30mm x 32mm and is designed for button head M3 screws.

UPDATE 6/4/2023
- Added low tolerance models (Inside hinge spacing increased; Increased spacing around hinge)

Update 8/1/2024
- Featured on YouTube by Shalin 3D Printing on 5/17/2024. (Awww! Thanks!)