This is made to go with the LowRider v3 CNC - KINEMATIC Tool-less Quick-Change Accessory Holder - supports laser, drag knife, pen, etc (v4.1).
Here's a helpful video I made about this:
This is a remix of:
https://www.printables.com/model/420517-lowrider-v3-cnc-tool-less-quick-change-accessory-h
…but modified to be compatible with the new kinematic tool-less quick-change accessory holder linked above.
Print notes:
Assembly and use:
Print this, then attach it to a spare Mobile Base printed from the above linked kinematic tool holder, using two M3 x 16mm screws. Attach the drag knife using zip ties. Then attach this and its Mobile Base to the Fixed Base on the LowRider v3 (this happens by a magnetic click), and then slice some vinyl to create something. Please post your make here, and post your results in the comments here.
Elephant's Foot Warning:
This tool, when mounted, can be thrown off kilter by Elephant's Foot (when the bottom one or more layers of a print are squished too much during printing). To try to prevent this, I've added some chamfers on the face that lays on the print bed. If your tool should be pointed crooked when mounted, check that face, which aligns against the Mobile Base, for any excessive Elephant's Foot, and cut / sand it off.
Change log:
My PayPal tip jar: https://paypal.me/design8studio
Various LowRider 3 CNC remixes:
View all my models and remixes on Printables:
*Amazon product links are affiliate links.
The author remixed this model.