Flic 2 Button Wall Mount/Cage/Cradle

The adhesive on the Flic 2 buttons is great unless you have textured walls, like we do. No matter how many times we stuck the button to the wall, it just fell right off, so I made a wall mount for ours.

There are two variations of two styles available:

• Hole mounts are intended to be mounted with a screw

• Strip mounts are to be mounted with a mini Command Strip

• Ridge models hold the Flic 2 button fairly securely but with a little play

• Drafted models hold the Flic 2 button very well and perfectly centered

I would recommend using a drywall screw or similar flat shallow screw. If the screw does not recess below the bottom of the mount, the button will wobble around on it.

Print Settings

Printer Brand:

LulzBot

Printer:

TAZ 6

Rafts:

No

Supports:

No

Resolution:

.25

Infill:

10%

Filament: eSun PLA+ White

Notes:

You may need to rotate the model 90u00ba to sit flat on the bed.