I made a corner phone mount for my Pixel 3 running Octo4A (Octoprint running on an Android). Initially I wanted it to run as a camera and Octoprint, however the use of the camera results in the phone overheating and killing your phone mid print. The ends up killing your entire print.
This can still be useful for holding your phone to host Octo4A to your printer so its all one contained unit. Or if you want to have your raspberry pi based OctoPi and/or Klipper on the platform with a phone or camera on the stand.
I've uploaded all variations on the files I made.
You'll need to replace the 2x corner screws with m5x16 screws (I used the hex socket head)
Standard files have 100mm arm, a little shorter than I wanted (see picture) so I made newer ones with a long arm.
LONG ARM - 150mm arm
NoNotch - no spot to attach platform
The one piece file is if you're feeling spicy and want to try to print the whole thing as one assembly.
Printer Brand:
ELEGOO
Printer:
ELEGOO NEPTUNE 3 Pro
Rafts:
Doesn't Matter
Supports:
No
Resolution:
.2mm
Infill:
20% grid
Filament: American Filament Silk PLA Silk Sea Green
Category: 3D Printer PartsThe author marked this model as their own original creation. Imported from Thingiverse.