Bambu Lab X1C / X1 Touch Screen Low Mount V2 (Drop 21mm or 13mm)

Currently, the files are V2, the description will be updated ASAP

This mount lets you lower your screen and provides more clearance on the top side (level with top glass or handle).

It offsets the mounting point 14mm outward, then 21mm or 13mm downward.

Application:

• If you have a shelf above the printer that is too close to the top glass, this mount will help.
• Or perhaps you are modeling a tools holder to place on top of the printer, the screen might be in the way and this mount will help.
• Etc.

Important Note:

• CAUTION!!! Be aware, that when the screen is tilted down with the mount installed, the glass door will collide with the screen, that's the only downside.
• 

Remarks:

• To level with the top glass, pick -21mm
• To level with the handle of the top glass, pick -13mm
• Bambu Labs PLA Matte works fine for me, with the default filament profile
• To remove the screen from the printer, compress the bottom and slide the screen to the right, just in case you are not aware
• 

Printing Stright Up Version:

• The final version is designed to be printed straight up, as the 4 tabs will be stronger this way.
• If you are picking this version, there are two areas that need to add support manually or deselect “Remove Small Overhangs”. (Bambu Studio has bugs, it is unable to generate support for sharp overhang), see the picture below or the .3mf file for reference
• 
• 

Printing Face Down Version:

• Originally I modeled this to be printed with the front face down, but the four tabs are easier to break due to the layer line, so I have changed the design to print straight up.
• But I have included the face-down version anyway, feel free to try at your own risk.
• It is actually easier to print, but if the tabs break, super glue will help.
•