Allsky Box for ZWO ASI 120MC

I needed a box for my ZWO ASI 120 MC under the sloping roof window in my house. For a while I used lots of cardboard and a tripod to bring it to the correct position - until the 3D printer arrived.

I contructed and printed all parts separately and used hotglue to bring it together. It was not necessary to have legs under the box it for me, but a college of mine needed them so there are simple legs included as stl. If you need another height for the legs just rezize them in Z.

You will have to print 2 x Seitenwand Trapez.stl as you see in the screens....

The Box-complete is the "all-tigether" file, but be careful - perhaps it will not fir for your camera. So it is better to print in parts and complete it after the print.

I also printed one additional KameraAbdeckung-150x2mm in white color to put it in front of the box under the window, so that the box has a kind of heatshield.