Voron 0.2 Tophat Webcam (HBVCAM-3M2111) Holder

The bracket is angled so that it points centrally to the print bed (when placed at the top).

Mount it to the top right of the tophat and adjust the position before fastening it.

You need the following parts:

• 4* RX-M3x57 threaded inserts
• 4* M3*6 button head screws (other M3 screws may also work)
• 1* M3 Nut
• 1* M3*18 socket head screws (BHS should work, too)

Warning: You need to partly disassembly your tophat to install the M3 nut.