This was made specifically for snap on set P/N: 210EFTAMY which has 2mm-3mm hex socket drivers in ¼" drive, and 4mm- 10mm hex socket drivers in 3/8" drive. Other brand sockets may or may not fit, YMMV.
Images are of it printed in Novamaker PLA+ green, Black text is Generic PLA. All stock generic filament settings on BL X1C, see below for print setting changes.
The base model does not come with text, as working with text in fusion is beyond infuriating to me as a beginner. I find it much easier to add after the fact in orca slicer, so the .3mf file does have it added, at a 1mm text height. If you do it yourself, just need to mess with text compression and spaces between text. I did the ¼ drives in one line and 3/8 drives in another.
Modifiers for print:
-Changed bottom thickness to 2mm and top layer thickness to 1mm for some extra beef.
-No Brim or supports Needed.
The author marked this model as their own original creation.