This Pinecil/TS100/TS80 Stand is a modified version of the original by Termiman. Instead of using a bearing which is held in with a screw I used a M8 nut I had laying around. It is simply press fit into the printed part, depending on your printer you might need to scale it up or down slightly or simply use a dab of superglue.
The M8 nut is drilled out with a 8mm drill with a chamfer on both sides.
I used PETG, 50% Infill, 6mm nozzle, 0,2mm layer height and 2 perimeters.
The author remixed this model.