Aruba Networking AP200, AP300 wall/ceiling mounting kit

Aruba Networking AP200, AP300 wall/ceiling mounting kit.  This is for mounting these APs to a wall or ceiling (including angled ceilings).  It uses a two (2) part mount to allow for the fitting of the mount base without having to hold onto the AP at the same time.  The AP mount base slides onto the AP's mounting studs and it locked in place with a 20mm M3 screw.

The AP mount base is joined to the bracket using an 20mm M4 screw and nut.

NOT FOR USE WITH THE AP500s OR AP600s