TS101 Rugged Box (Magnetic Version)

After using the rugged Pinecil/TS100 box for a while I decided to make a few enhancements to better suit my needs.
299
1011
19
6789
updated May 31, 2023

Makes

Comments

Lovely model, I decided to stop using the brass wool compartment though since the small pieces of solder constantly fell out and spread around in the case and I like it clean. So I'm currently designing a small addon tool that contains the brass wool stuff.

Also working on a small second case that holds additional tools like tweezers, flux, heated insert tools and more.

Printed the outside case in Sunlu PLA+ Black and Orange and the inlays are printed in Azurefilm PCTG black filament. Printed on the X1C.

unfortunatle the middle spools hits the soldering iron when trying to close it meaning it is not usable. Is there something I'm missing?

It would be very helpful for a guide of where to use what magnet

Still waiting on the screws to compelat the full build.

Printed in bottel PET with a .4 nozzel and 0.2 layer hight

View one more comment

@Grilli_1392628 No problem! Even with the magnetic lid small pieces of solder can come out. I had one of the pieces fall into the USB-C socket haha. Maybe it will get fixed in the future.

Printed in prusament marble grey and primaselect matte black.

Great model and my second time printing it!

great fit. the magnets are the chefs kiss for this model

Perfect, thanks for the awesome model (edited)

Any chance for you to split up the stl? it is to heavy to open with my editing tool

Good model, turned out great. (edited)