Print in Place Storage

This is a compact, print-in-place storage solution with magnets to keep the box closed. No support material needed :)

I designed this enclosure specifically to hold small items, while staying nice and compact. The hinge can be printed without support material. Once released from the bed, it has a nice feel without too much clearance.

Requires two 4mm round magnets (~ 1.75mm thick). I used super glue to secure them in place, but just press fitting them in might be good already.

Support

If you'd like to support me for the 3D models I distribute for free, you can use the following AliExpress affiliate link: https://s.click.aliexpress.com/e/_AoUC8h

Whenever you buy something through this link, I get a small kickback without costs for you :)