Ender 6 cr touch mount for micro swiss ng

mounts to left shroud mount. will need to change the m3 bolt to a m3x8mm and 2 are needed for the cr touch. i did find that i needed to place a nut at the bottom of the v2 mount to allow for clearance. this is my first attemp and think i will do another version so it has more clearance. version 3 does not need m3 nuts

Print Settings

Printer Brand:

Creality

Printer:

Ender-6

Rafts:

No

Supports:

No

Resolution:

0.2mm

Infill:

99%