Stand for Bambu Lab Filament Spool Switcher & Winder

Stand for Bambu Lab Filament Spool Switcher & Winder
2,110
6295
52
50 k
updated November 22, 2024

Comments

Hi,
first of all: thanks for your awesome multi-part remix of the original machine! I am just finishing printing the final parts and everything appears to be just fine. Can't wait to see it in action. :-)

One question about this part of the build: I cannot figure out where the bearing caps go. The only caps I can spot in your images are the ones I already printed with the "Gears & Axes"...

@FlyingLemming_806362 Hi. Thanks alot. Which covers are you talking about? The ones in the photo? If so, only 2 pcs. Assembly as in the picture.

There are two types. You only need to print 2 pcs. Depending on what axis you are using. (edited)

@Damian27 Yes, those are the covers I was talking about. I already have those as they are a part of your „Gears and Axes“ remix. I was just wondering why they are included in the Stand project as well and if I might have missed something. If they are not intended for some other spot on the machine, I may very well omit printing them again.

BTW: I already transferred a couple of 3DJake spools – which are too wide for the AMS – to Bambu spools this afternoon and the machine worked like a charm! :-) I will add some photos as soon as I have all the parts for the Stand and the machine is complete. (edited)

@FlyingLemming_806362 Hi. Many people have already printed the original design. It didn't use my remix with gears. So I added it to the Stand project as well. Regards. I am waiting for photos.

Show all comments