microLipo - the 1S LiPo HV 6-pack

This is a container that contains 6 1s batteries for tiny-whoops.
8h 26m
2× print file
0.20 mm
0.40 mm
71.00 g
2
16
0
112
updated May 11, 2023

Description

PDF

Have you ever been tired of running around your house looking for the little batteries for your tiny-whoop? No more. Store them all in one place, retained from falling out by springy walls to ensure no batteries ever falling out.

----------------------------------------------------------------------------------------------------------------

The thin walls should be printed as one perimeter to provide a cushioning for the packs that are slightly swollen with the amount of flights. Originally designed for DogCom 450mAh LiPoHv batteries. STEP and F3D files included to allow for size adjustment for your batteries in case they differ.

----------------------------------------------------------------------------------------------------------------

Originally designed for batteries:

  • 8mm thick
  • 18mm wide
  • 37.5mm deep (batteries stick out for easier access.

----------------------------------------------------------------------------------------------------------------

Prints best at 0.2mm walls to ensure springiness

0.3mm will make the spring only 1 wall thick.

Tags



Model origin

The author marked this model as their own original creation.

License