Print 3D Channel Maker Coin

The Print 3D Channel presents our very own Maker Coin. Designed and modeled in Cinema 4D and then printed using multiple colors of MatterHackers PRO PLA on the gCreate gMax 1.5XT+ using a single extruder and the change filament command.

Printer: gCreate gMax 1.5XT+

Filament: MatterHackers PRO PLA 1.75mm In Multiple Colors

Temps: 200c

Layer Height: .16mm

Perimeters: 3

Top/Bottom Layers: 5/3

Infill: 17%

Support: None

Scale: 100%

Print Time: 1hrs 48min

Link to Print 3D Channel episode featuring Maker Coin Model and Print: