Falcon F16v4 Diff Expansion Mount

Simple to print, print face down.

This PSU Mount is designed to fit the standard hole dimensions for Meanwell LRS 350. This will hold 2 PSUs and removes the need for an extra mount setup for stacking the PSU's

The design has a in-cut on the bottom to allow for nuts/bolts to rest above the PSU. Design only uses top screw holes on the PSU to allow the bottom to be used for PSU mounting.

Mounting Hardware:

4x - M4 - 8mm bolts (secure mount to PSU)

4x - M3 - 12mm bolts/nuts (secure controller to mount)

F16v4 Expansion - https://pixelcontroller.com/store/main/73-f16v4differentialexpansion.html

MW LRS 350 - https://www.amazon.com/LRS-350-24-Enclosed-Switching-Replacement-Termina

MW LRS 600 - https://www.digikey.com/en/products/detail/mean-well-usa-inc/LRS-600-27/16394232