Mini Pool Table / Tabletop Billard Add On

I got this Mini Pool Table for Christmas and it really is fun.

Only thing, unless you have tiny hands, it's really hard to get the balls back from the pockets. So we used a spoon as a tool, but that's not my way of solving this.

So now we got this pretty big add on :-)

There are four corners as fundamentals. In between you can put any 3 mm plane you want as a inclined plane. I chose plexiglass but glued felt on it so it doesn't shatter that much.

The plane has a 3 degree tilt so the balls run down and the bottom corners lead them to the collector. The shields on the side avoid any losses.

I spraypainted this whole base as you can see in the pictures.

Pretty easy built and really comfortable while playing.

The table I have hase about these measurements:

511 x 311 x 77 mm and about 9.5 mm wall thickness.

Therefore the plane is about 525 x 320 mm

For even more comfort I made hooks for the queues.

I hope you have fun with that too. Comment for any suggestions and like if you want to. :-)

Print Settings

Printer Brand:

Anycubic

Printer:

All-metal Mega

Rafts:

Doesn't Matter

Supports:

Doesn't Matter

Resolution:

0.2 mm

Infill:

25 %

Filament: PLA PLA White