HiLetGo LM2956 Model

HiLetGo LM2956

This is a model of the HiLetGo LM2956 buck convertor. I used my calipers to measure as accurately as possible, so things should be +/- 0.05mm in accuracy. This can be used for creating your own cases for the buck converter.

I left of a few of the less important bits that are not related to making adjustments to the buck converter, seeing the voltage display, or high spots that need to be accounted for when modeling a case.

Keep in mind that the prongs for the electrics will stick below that board by about 1.60mm.

Amazon Link: https://www.amazon.com/gp/product/B00LSEBYHU