Core XY X Axis Switch Mount Plus Y End Stop

This is a end stop mod for TK Ward's Core XY Kit. With it you can use Y axis stock switch and home in the same way it did with the stock FT5 setup. You will need to run the X axis switch wire with the other hotend wires. Small price to pay to get the homes the same!

Note: I have not set my FT5 up with this yet but there shouldn't be any issues that I can see.

UPDATE: 4-15-19. Edited the Y axis endstop on the full version. Will be fixing the small version shortly. Added a one piece pully mount for the other side. Seams to be stronger.

UPDATE: 4-15-19. Small Version fixed!

UPDATE: 4-14-19. Moved the screw hole closer to be center on the micro switch.

UPDATE: 4-14-19. Modeled a version for the batch that had only two holes on each end. Hope the holes line up. All I had to go on was the universal ends with four holes. After printing, drill holes out with a 13/64" drill. Someone let me know if it works please.

Link to TK Ward's Core XY Kit. https://www.facebook.com/groups/Folgertech3DPrintMods/permalink/407825643346538/

Print Settings

Printer:

Folger Tech FT-5

Rafts:

No

Supports:

No

Resolution:

.3

Infill:

15%

Filament:

Transparent