Hi guys, this is my fourth design that I upload to Printables and I want to share it with all of you. Cthulhu Demon Ship is created from the reference and shape of a Benchy, but modeled from scratch.
But since this model is not to calibrate... download the one and only Benchy from its official pages.
The printing of the video is made in normal PLA with the following parameters in the slicer of your choice (but you can use the parameters that you use the most and work best for you)
Cthulhu Demon Ship.STL
Layer High: 0.28mm
Infill: 10%
Print size: 100mm (10cm high) - Recommended high for PLA so as not to lose some details if it is printed at a smaller size. In resin it can be printed a little smaller.
Support Type: Tree
Printing time: 13 hours and 10min
Post-processing: Sanded in some parts and apply primer before painting
I must clarify that in my case I split the model in two with the Prusa Slicer, I printed both parts and did a post-processing. But it depends on each one, how it is easier for them to print it.
You can follow me on instagram,
https://www.instagram.com/gioteya_designs/
https://www.facebook.com/gioteyadesigns
to find out what I designs I am currently working on :)
If you want to support me, you can find more models in my account:
https://cults3d.com/es/usuarios/GioteyaDesigns/creaci%C3%B3n
https://www.cgtrader.com/gioteyadesigns
I hope you enjoy and Happy Printing :)
The author marked this model as their own original creation.