Robomow RS series mud wheel

The perfect extension for your RS series mower. Mud wheel is a good solve for a wet lawn at early morning and late evening.

Please note that there are two models in the project - lateral (installed from the sides of the wheel) and central (installed between the side pads). To equip one wheel, you need to print one center and two side pads.

I highly recommend these settings of printing:

filament - ABS or PETG

infill - 25%

solid infill threshold area - 25 mm2

perimeters - 3

layer - 0.2 ~ 0.3 mm

Attach to the wheel with three self-tapping screws 7-10 mm.

Category: Replacement Parts