This chuck will thread on most lathes with a 1.25 x 8 threaded shaft. Print using nylon with a 2 % bump in size to give the threads a looser fitting. A pipe clamp is used to tighten the clamp around the wood.
Printer:
Robox
Supports:
No
Resolution:
.2 mm
Infill:
100%
Notes:
This chuck is made from nylon. A pipe clamp is used to tighten the chuck around the ball. The thread is for a 1.25 X 8 thread.
Category: ToolsThe author marked this model as their own original creation. Imported from Thingiverse.