NES Cleaning Cartridge

A 3D-printable NES cleaning cartridge modeled after the official one included with the cleaning kit. It's been optimized to be better for 3D-printing however. You'll need to wrap the card with a thin piece of cloth as obviously cloth is something that can't yet be 3D-printed. lol

Usage instructions as per the original manual:

Printing tips:

The top piece should be printed upright with supports under the handle and under the tabs as shown here below. I also recommend using a raft as there isn't much surface area on the bed.

The bottom piece just needs supports under the hole on the right as shown below.