Small mount / stand-off for a common metal-encapsulated DS18B20 temperature sensor. I use two of these, monitored by Octoprint, to watch temperatures of the enclosure and a filament dryer.
Base has a recess for an M3x8 nut; use an M3x6 screw to attach to the enclosure. Use a cable tie through the slots to secure the DS18B20 to the mount.
No support needed – The unsupported areas are small and bridge easily (even in PETG).
**UPDATED 13-May-2024 to add “V2”, taller standoff.
The author marked this model as their own original creation.