Parametric Kleenex Box

I wanted a way to show off my plate textures, like my new PET plate, on all sides of the box. Parts are printed separately and the box is glued together. Two styles are included, one with support posts (V2) and one without (V1). You can configure the design to match almost any size kleenex box using parameters in the Fusion file. The included stl's are 230x125x90, but you can make them any size you want. To print either V1 or V2 toggle the visibility of the desired version in Fusion and export the top and side stl's. Parameters are as follows:

Length = Actual length of the box in mm

Width = Actual width of the box in mm

Height = Actual height of the box in mm

OvalLength = Major axis of the opening in the top

OvalWidth = Minor axis of the opening in the top. Set them the same for a round hole

Thickness = Thickness of the walls

Print one Top and two of each of the sides. I used PLA at .2mm, no supports, brim optional.