This is a simple battery organizer I designed in Fusion360. I designed it to solve my battery drawer storage mayhem. It stores the most common sizes and features a place to keep odd-sized batteries and related things.
I print this with PLA. XY printed dimensions are 200mm x 200mm. As long as the finished print is 200mm x 200mm +/- 2mm, batteries should fit comfortably. If you're not sure about the size, start the first layer and measure, then adjust scale until you reach the correct measurement.
Print settings: 10% infill, 0.2mm layer height.
This is my first model posting here, so if you have questions or recommendations, please let me know in the comments.
The author marked this model as their own original creation.