Voron Trident Top Mount Raspberry Pi Style Wide Camera Mount

Print with ABS/ASA as it mounted within the chamber no support required. Simple print, slide in camera. 
 

To cable manage the flex cable, high temp double tape or kapton tape.

Does not require you remove top panel to install, just pre-route cable loom to camera from bottom.

Hardware BOM:

1x M3 T-NUT

1x M3x12 Bolt

Camera/Cable Bom: For Trident LDO 300 Cube, you may get away with shorter flex cable for smaller volume. (With Inverted Electronics, you may need longer CSI cable 1.5mm or 2m)

Wide Ip Camera: Shop Link
CSI Cable (1m): Shop Link