Both model's are rescaled to fit better on the headphone.
The one with the Punisher Skull you can color change it if you like.
You can use multiple colors buy using different height for each layer height.
I'm using prusa mk3s with a 0.6mm nozzle.
Total print time should be 1h7m give or take depends on what printer your using.
I used PLA to print them out 0.3mm layer height 15-20% infill perimeter 8 and support on build plate only.
Just need some magnets once printed. magnet size I used 10x1mm.
The author remixed this model.