Customizable Light Up Sign

This light up sign is designed for you to be able to accent a room or studio area with ease. To make the sign really pop, you can do a filament swap for the raised text or color in the top printed layer with a sharpie. 

To make this sign you will print the light box body. I would recommend printing this in a dark filament especially if you intend to add LED lights.

Then print your favorite placard design. I have included “On Air” and “Subscribe” with the YouTube logo and will be adding more in the future. To make the sign really pop, you can do a filament swap for the raised text or color in the top printed layer with a sharpie. If you want to make your own signs or make any changes I have included both .f3d and .step files for your conveneince.

If you intend to wall hang this design, there are two keyhole screw holes in the back of the body and an included drill template you can optionally print.

To make the box light up there should be enough room for a cheap LED strip to be ran around the inside of the box and a hole on the left hand side to route a power cable out.