accoustic headless guitar

An acoustic guitar with style.

Because electric guitars are not enough of a challenge (hardly any impact of the body on the sound). So, try to print this one. If you want to go fancy with the sound: You can replace the top deck with other designs to find out how much this affects sound.

Can be printed with minimal support (although it needs quite a bit of material).
Fully functional and sounds good.

Printabel in a 210x210x210mm volume

Have a close look at the attached build manual. 
This is definitely something for a person who likes challenges.

Print the fretboard standing on the long side.
Print the deck standing on the one straight side (custom supports for reduced wobble included in the model)
The body needs some tree support. The rest of the parts should be straight forward.

sheet metal parts: either cut with lasercutter from dxf-file, or print the pdf on the sheet metal and cut by hand.

also see https://www.thingiverse.com/thing:6001227/