I had a lot of menus and recipe papers scattered around the kitchen, fortunately my friend Steve suggested 3D printing a menu holder, and thus I did. I took it a step further by creating this model with parametric adjustments so that you will be able to size it to your needs.
• Super Glue
• 10x2mm Magnets
• Width - Adjusts the inside width of the holder (set slightly wider than the paper width you are using)
• HEIGHT - Overall height of the holder
• DEPTH - Adjust to hold more paper
For more information on how to use parametric adjustments visit Prusa's guide
Filament: PLA or PETG
Nozzle Size: 0.4mm or 0.6mm
Print Height: 0.2-0.35mm
Infill: 10%
The author marked this model as their own original creation.