Sonic, the title character of Sega's Sonic the Hedgehog video game franchise, created by Naoto Ohshima and Yuji Naka.
134
1103
4
3954
updated April 28, 2023

Description

PDF

Sonic, the title character of Sega's Sonic the Hedgehog video game franchise, created by Naoto Ohshima and Yuji Naka.

This is a onepiece version of Sonic based on my multi-part Sonic model that I've previously posted.  

Since I do not have an SLA printer, I teamed up with maker Kyler Stern to do the printing and painting.

I converted my multi-part model to a onepiece model for SLA and FDM printing.   Kyler then proceeded as follows:

Sonic: Decrease size from original to 3 Inches tall.
Scale: X: 2.39, Y: 2.11, Z: 3.00 Inch = 47.72% of original size
Printer: Anycubic Photon M3
Resin: Anycubic Water-Wash Resin+ Grey
Layer Thickness: 0.05 mm
Partially hollowed. Hand, feet, 5 lower spikes were not hollowed. Basically this allowed the model to be hollowed right down the center and the top three spikes.
Print time: 5 hours

Note: Something important to call out regarding print time.  Kyler has his screen power set to 80% power. This increases print time significantly but extends screen life. This might be important for individuals going forward.

 

Other notes regarding the supplied STL file:

For FDM and SLA printing, size the STL file as needed for your purpose and add Slicer supports.

Enjoy!

Model origin

The author marked this model as their own original creation.

License


Highlighted models from creator

View more