Professional Name Plate (+Card/Pen Holder)

Make sure to like and rate the file if you found it useful! Tips are also appreciated if you'd like to see more files from me or if you would like to request changes or updates to files!

Tip Via Stripe

Tip Via PayPal

A professional name plate with card and pen holder. Print the name plate flat with the text side facing up. You may need to print diagonally for the print to fit at 100% scale. Scaling the print smaller will work, but you will need to drill the bolt holes or use glue to 

• Attach the name plate to the main body with glue, double sided tape, or 2x M3x20 bolts. 
• Be careful not to over tighten the bolts as this can damage the name plate.
• Should not require a brim or supports.
• Colored text is done with a filament change at 5.7mm.
• A cooling tower may be useful for sharp text on the name plate if your part cooling is not effective enough.