This is a lid that works with my FireBoard 2 Minimalist Case:
https://www.prusaprinters.org/prints/46461-fireboard-2-minimalist-case
The lid just fits onto the case by friction fit, so how tightly (or not) it fits will depend in your printer and settings. It should fit snugly enough in most cases to stay in place with the Fireboard mounted on a flat or vertical surface, at least in my experience.
The lid is not required, but it could provide some protection from the elements for the probe ports and such. While I printed it in black to make it contrast with my case for the photos, I'd probably print it in a lighter color to help reduce how hot it gets in the sun.
This is a lid that works with my FireBoard 2 Minimalist Case:
https://www.thingiverse.com/thing:4494092
The lid just fits onto the case by friction fit, so how tightly (or not) it fits will depend in your printer and settings. It should fit snugly enough in most cases to stay in place with the Fireboard mounted on a flat or vertical surface, at least in my experience.
The lid is not required, but it could provide some protection from the elements for the probe ports and such. While I printed it in black to make it contrast with my case for the photos, I'd probably print it in a lighter color to help reduce how hot it gets in the sun.
Printer Brand: Monoprice
Printer: Maker Select
Rafts: Doesn't Matter
Supports: No
Resolution: 0.2mm
Infill: 20%
The author marked this model as their own original creation. Imported from Thingiverse.