Large Gift Box

Gift box with hinge and magnetic lock. External dimensions 180mm x 168mm (180x178 with hinge)  internal 163mm x 175mm.

Print top part (Box_with_hinge_top.stl) on flat side down.

You can print separately text, wishes or any other decoration and glue on top or inside.

Pin for hinge should be glued, you can glue it to one side of hinge for extra strength, other will still work.

Magnets are glued in place. Two sizes of magnets (9.70 mm x 4,1mm and 9,6mm x 1.6) that I had on hand, you can still modify it using file Box with hinge_magnet_blank.stl